FAQ Regarding adding Keyless Entry
Q: My Dealer says the vehicle doesn't have the hardware for keyless entry if it wasn't ordered with it?
A: Your dealer is wrong. ALL 2013 and up Ford Police Interceptor vehicles have everything they need for factory keyless entry. It just needs to be enabled.
Q: Will enabling keyless entry void my warranty?
A: Under law manufacturers can not blindly void an entire vehicle warranty for aftermarket modifications, if this was the case all police vehicles wouldn't have a warranty. Not to mention adding keyless entry is enabling something the vehicle is already equipped with. If something with the Keyless Entry system would fail hardware wise within the vehicle the part should be covered as all modules that control KE also control other things within the vehicle. There is no independent module for keyless entry.
13-18 PI SEDAN & 13-15 PI UTILITY KEYLESS ENTRY KIT
Each kit includes either two 4 button FOBs (Sedan) or two 3 Button FOBs (Utility), Keyless Entry IDS Activation file plus instructions for dealer programming. Please email me Jason@FordPIMods.com for questions and ordering information. NOTE: VIN is Required. THESE BASIC FOBS DO NOT CONTROL REMOTE START
THIS CAN BE ADDED TO FLEET KEY VEHICLES THAT FORD SAID YOU COULDN'T ORDER KEYLESS ENTRY WITH!
Perhaps your agency forgot to order your PI Sedan or Utility with Keyless Entry or you have picked up a used unit that didn't come with Keyless Entry. You CAN add OEM Keyless Entry, which by the way also sets up the possibility of adding OEMRemote Start.
Dealer programming is required. EACH KIT IS VIN SPECIFIC AND CAN ONLY BE USED ON ONE VEHICLE.
OEM "STICK ON" KEYPAD ENTRY
Add the Ford "stick on" door Keypad to any 13-18 Police Interceptor with functioning OEM keyless entry. PI models can "remember" up to 4 remotes. The keypad would be considered one of these. For the 13-18 Sedan and 13-15 Utility these can be programmed to the vehicle by the end user. For the 16-18 Utility the keypad must be programmed to the vehicle using dealer IDS software so a dealer visit would be in order.
The part # for this keypad is ES7Z-14A626-A with a suggested retail price of $85 from Ford. I do not sell this item. YOU MUST HAVE FUNCTIONING KEYLESS ENTRY FOR THIS TO WORK.
The13-17 Sedan and 13-15 Utility can be programmed with up to 4 basic KE fobs and/or IKTs (referenced on the remote start page). Yes a vehicle can have both styles programmed to it.
THIS VIDEO DEMONSTRATES THE DEALER PROGRAMMING NEEDED!!
2016-18 UTILITY KEYLESS ENTRY INFORMATION
The 2016-18 Utility has a new electrical platform and FOBs from previous year will not work. The Ford part numbers for FOBs are GB5Z-15K601-A (lock/unlock/panic) and GB5Z-15K601-C (lock/unlock/liftgate timer). You should obtain FOBs from your dealer. Your dealer must program them to the vehicle using their IDS computer system. Purchase the KE Activation File Below.
KEYLESS ENTRY ACTIVATION FILE ONLY - IF YOU WISH TO SUPPLY YOUR OWN FOBS FOR KEYLESS ENTRY, PURCHASE THE KEYLESS ENTRY ACTIVATION ONLY FILE
13-18 Keyless Entry Activation IDS File Only- NO FOBS - $35 (via e-mail)
13-15 UTILITY KE KIT (ACTIVATION+2 OEM FOBS) - $65/ea+Shipping
13-18 SEDAN KE KIT (ACTIVATION+2 OEM style FOBS) - $65/ea+Shipping